Publicité
Les langues disponibles
Les langues disponibles
5300-0003
Step 4: Place the polyethylene cover over the roof frame assembly. (See Figure 3)
Step 5
: Finish assembling legs by inserting Pole No.6 into the other end of Pole No.5, inserting the Base Plate No.8
onto the bottom of Pole No.6.
Step 6
: PuII the polyethylene cover tightly over the frame. Insert hook at the bottom of each side flap into topmost
of the 3 holes on Pole No.6. If the cover loosens over time, you may tighten by inserting hook into lower holes.
Varan Motors
T: 00352/26908036 – F: 00352/26908040
BCIE SARL, gruuss-strooss 28, 9991 Weiswampach, Luxembourg
Publicité
