DeWalt DCT419 Guide D'utilisation page 14

SCANNING PROCESS
1. The screen below will indicate that the hand-held wall scanner is
ready to start a new scan.
2. Place the hand-held wall scanner on the wall to start a new scan.
3. Move the hand-held wall scanner along the wall surface in a
straight line. The screen below will appear indicating the pre-scan
data mapping is in process.
4. The hand-held wall scanner has a scannable range of 9.8 feet
(3 meters) of wall section. The yellow memory bar will fi ll, indicating
how much of the available range is used. As the distance limit is
approached, the memory bar will turn red.
5. Reverse scanning direction to read the mapped data. The main
viewing screen below will appear.
Ensure that the wheels are in contact with the wall surface during the
entire pre-scan data mapping and scanning passes.
12