Quick Setup; Connection Diagram - Alto Professional APX2000 Guide D'utilisation Simplifié

QUICKSTART GUIDE (ENGLISH)
BOX CONTENTS
APX2000
Power cable
Quickstart Guide
Safety & Warranty Information Booklet

QUICK SETUP

Make sure all items listed in the BOX CONTENTS section are included in the box.
1.
READ SAFETY & WARRANTY INFORMATION BOOKLET BEFORE USING THE PRODUCT.
2.
Study the connection diagram in this guide.
3.
Place all devices in an appropriate position for operation.
4.
Make sure all devices are turned off and all faders and gain knobs are set to "zero."
5.
Connect all sound sources' outputs to amplifier inputs as indicated in the diagram.
6.
Connect the amplifier outputs to speakers.
7.
Plug all devices into an appropriate power source.
8.
Switch everything on in the following order:
9.
•
Sound sources (i.e. microphones, turntables, CD players, etc.)
•
Mixer
•
Amplifier
•
Speakers
When turning powering down, turn everything off in the following order:
10.
•
Speakers
•
Amplifier
•
Mixer
•
Sound sources

CONNECTION DIAGRAM

CH1 CH1
CH3 CH3
MIXER
STEREO
CH2 CH2 CH1 CH1 CH2 CH2
CH4 CH4 CH3 CH4 CH3 CH4
AMPLIFIER
SPEAKERS
Do NOT make any connections
when any device is powered on.
Note: Please see the SPEAKER
CONNECTION section for important
setup information.
2
POWER