Edirol Studio Canvas SD-20 Mode D'emploi page 32

Getting connected and installing drivers (Windows)
17
The Roland Serial MIDI Driver Settings dialog box will appear.
Set the following items. Click [OK].
fig.2-23_30
COM Ports
Select the serial port (COM
port) to which the SD-20's
serial port is connected.
Switches
Check "Use multiple ports."
Click the
of the [Sound module] field,
and select SD-20.
* Do not check "Activate CTS/RTS
Flow Control."
18
When driver installation has been
completed, the Restart your
computer dialog box will appear.
Restart your computer.
If you changed "What action do you want Windows to take?"
If you changed the What action do you want Windows to take? setting in
step 5, restore the original setting after Windows restarts.
1.
If you are using Windows XP Professional, log on to Windows using
the user name of an administrative account (e.g., Administrator).
2. Click the Windows Start menu, and from the menu, select Control
Panel.
3. In "Pick a category," click "Performance and Maintenance."
4.
In "or pick a Control Panel icon," click the System icon. The System
Properties dialog box will appear.
5. Click the Hardware tab, and then click [Driver Signing]. The Driver
Signing Options dialog box will appear.
6. Return the What action do you want Windows to take? setting to the
original setting (either "Warn" or "Block"), and click [OK].
7. Click [OK]. The System properties dialog box will close.
Next, you need to make the driver settings.
(-> Settings and checking (p. 39))
32
symbol at the right