Publicité
Les langues disponibles
Les langues disponibles
automatically
V. Adjusting Picture parameter.
- Click ► Start ►Program ► USB PC Camera ► Amcap
- Video Filter - Click Options ► Preview : Screen shall display image on the
Window
- Click Options ► Video capture filter ► Proc Amp
You can adjust the following values:
Anti Flickering: According to your power frequency 50 or 60Hz
Auto Exposure / Brightness / Contrast / Saturation / Gamma /
Sharpening / Quality / Restore Default / Indoor or outdoor
Video Output: Mirror function / Vertical flip
- After configure all the values, click "Apply" to see if accept
- Click "OK" back to video picture.
- Set Frame Rate:
Click Options ► Video Capture Pin, Frame Rate Sets 30 fps
Click Used Frame Rate
Click Options ► Show Frame Rate, Frame Rate will display on the down left
screen FPS digit.
VI. Capture one frame & Snap shot;
- After aiming your target, push snap shot button on the bottom side of PC
Cam, will capture one single frame
- Or click My Computer icon, click take one picture function icon will capture
one single frame picture on screen
V. Recording & Capture the picture;
Live Recording:
- Video Capture : input file name, Select file name <. avi>, click "Open" and
click OK
- Click "Capture", if select "Capture Audio", will capture the
picture with voice. Ignore "Master Stream" function.
- Click "Set Time Limit" is to set the record time
- After Setting, Click "Use Time Limit", click "OK ", you may start to record the
video.
- Click "Capture", aiming the Camera to the target
- Click "Start Capture" will start recording.
- Timer and file size start to count, will stop until times out,
- Click again or press "ESC" key to stop, recording, record completed
- Click the recording path and file names to review the result
Publicité
