Publicité
Les langues disponibles
Les langues disponibles
Installation and
Operating Instructions
I R A K L I O
FL O OR LAMP
Model: LT2109_SMART
Specification
Material: Plastic
Rated voltage: 230 V - 240 V~, 50 Hz
Rated power: LED 12 W, 1000 lm, 3000 K
Bulb: LEDs (non-replaceable)
Dimensions: Ø 130 mm x 1032 mm
IP-Class: 20
Content
1 x Manual
1 x Lamp
Important safeguards
· Please read this instruction carefully before installation and
use.
· Keep this manual for further reference.
· Keep this product out of reach of children and unauthorized
persons.
· Before the first connecting of the appliance ensure that
voltage indicated on the rating label corresponds the mains
voltage in your home.
· Always unplug the light from the mains prior to assembly,
disassembly, cleaning or if the light will not be used for
extended periods.
· The maintenance of luminaires is limited to their surfaces.
Moisture must not be allowed to enter connection rooms or
parts carrying mains voltage.
· Do not install the lamp on damp or conductive surfaces.
· Make sure that cables are not damaged during installation.
· Do not kink the power cable.
· Do not lay the cable over sharp edges or around sharp
corners.
· Do not use the power cord as a carrying handle.
· Do not cover the light or the mains plug with objects. Exces-
sive heat can result in a fire.
· Do not look directly into the light beam of the lamp.
· The light source of this luminaire is not replaceable; when
the light source reaches its end of life the whole luminaire
shall be replaced.
· Disposal together with household garbage is expressly
prohibited. Disused luminaires can be returned at the point
of sale.
GB
MOOD_Leuchten_iraklio_1371941_7613164597168_bda_150720_RZ.indd 5
MOOD_Leuchten_iraklio_1371941_7613164597168_bda_150720_RZ.indd 5
Mounting
· Remove all packing materials.
· Check the lamp for damage before installation. The safety
instructions and technical data must be observed!
· All enclosed individual parts must be installed.
· Place the lamp on a stable, horizontal surface.
· Connect the lead cable of the power supply to the cable of
the lamp.
· Plug the power supply into a properly installed socket.
Your lamp is now ready for operation.
Funzionamento della lampada
· The light can be switched on and off via the in-line switch
on the lead cable of the power supply.
· The initial state of the lamp is warm white at full bri-
ghtness.
· A controller with a control button is located at the lead
cable of the lamp, which can be used to switch various
operating states.
· If the product is turned on and it has not been connec-
ted to the App, you can manually switch the following
operating states via the control button: red → grass-green
→ green → dark green → light blue → blue → purple
→ white (25% brightness) → white (100% brightness) →
white (100% brightness) → white (50% brightness) →
green (pulsating) → abrupt color change → automatic
color change (red, green, blue) → smooth color transition
→ off. Then the cycle will begin anew!
· If the product is turned on and it is connected to the App,
you can manually switch the following operating states
via the control button: red → grass-green → green →
dark green → light blue → blue → purple → App mode
„Night" → App mode „Read" → App mode „Working"
→ App mode „Leisure" → App mode „Soft" → App
mode „Colorful" → App mode „Dazzling" → App mode
„Gorgeous" → off. Then the cycle will begin anew!
· Note that the default colors of the various App modes can
be changed with the "edit" function of the App. After such
a change, the user-defined settings are saved and can also
be called up manually via the control button on the lead
cable.
Operation of the lamp via Tuya App
· Set the in-line switch to "On" position to be able to control
the lamp via App using a smartphone with WiFi/WLAN
connection. The relevant app "Tuya Smart" is available for
this purpose.
· The app "Tuya Smart" can be downloaded for Apple
products in the App Store and for Android products in the
Play Store.
· The product must be in learning mode (usually same as the
delivery standard) in order to register the product in the
"Tuya Smart" app. The product can also be manually set
to learning mode in order to register it in the "Tuya Smart"
app. This is achieved by 3 x switching the power supply off
and then on again (cord switch, wall switch etc.). The lear-
ning mode is indicated by continual blinking of the article.
· In the "Tuya Smart" app, select the category «Lighting»
and the product type «Lighting(BLE+Wi-Fi)» to connect the
product while it is in learning mode.
· After registration of the product in the "Tuya Smart" app the
product is then controllable and ready for operation using
compatible speech controlled systems (Amazon Alexa /
Google Home). The skill required for Amazon Alexa / Goo-
gle Home with the "Tuya Smart" designation then needs to
be activated in the app.
· When you disconnect the product using the "Tuya Smart"
app, the light flashes continuously. For a complete and safe
disconnection, wait for at least 10 seconds before turning
off the product via the in-line switch.
Symbols explanation
CE conformity marking: The manufacturer shall certify with an
EC declaration of conformity, that the product complies with all
applicable European Community Directives.
rotection class II: The mains adapter corresponds to protection
class II and is specially insulated. It must therefore not be connec-
ted to the protective conductor (green-yellow wire).
The LED floor lamp complies with protection class III and thus
operates in a completely safe voltage range.
This product is designed for indoor use only. Never use them
outdoors.
The crossed-out wheeled bin symbol indicates that the item should
be disposed of separately from household waste. The item should
be handed in for recycling in accordance with local environmental
regulations for waste disposal. By separating a marked item from
household waste, you will help reduce the volume of waste sent
to incinerators or land-fill and minimize any potential negative
impact on human health and the environment.
Cleaning
Turn off the power to clean the lamp and let the lamp cool down. Clean the
lamp with a soft cloth (if necessary, slightly moistened). Never use alcohol,
solvents or similar cleaner, they could damage the lamp.
V200713
15.07.20 11:02
15.07.20 11:02
Publicité
