physician. It is suggested that the unit is
disinfected after the last treatment of the day.
1. Use one part of white vinegar with three parts
of distilled water. Make sure mixed solution is
enough to submerge the nebulizer, mouth piece
and mask.
2. Complete Rinsing Steps 1-3.
3. Wash nebulizer, mouthpiece and mask in warm
water and a mild detergent. Then wash them in
hot tap water.
4. Submerge these parts in the vinegar and water
solution for thirty minutes.
5. Complete Rinsing Steps 3-5.
Cleaning the compressor
1. Wipe daily with a damp cloth.
2. Do not use any powdered cleaners or soap pads,
which may damage the finish.
6. FILTER CHANGE
1. Do not use cotton or any other materials. Do
not wash or clean the filter. Only use filters
supplied by your distributor. And do not operate
without a filter.
2. Change the filter every 30 days or when the
filter turns gray.
3. Changing procedure:
Remove the filter cover.
Replace the used filter with a new one.
Replace the filter cover.
7