List Of Accessories; Getting Started - DOMENA SC100 Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

LIST OF ACCESSORIES

Rectangular brush for floors
1
2
3
Extension tube (x2)
Fabric furnishings brush
1. Cloth attachment
2. Connector for extension tube
3. Cloth for fabric brush
Concentrated steam jet nozzle
Fabric furnishings brush
18
Round nylon brush
Filling beaker

GETTING STARTED

1. Attaching accessories
Attach the accessories to the pistol handle or one or two extension tubes.
2. Filling the water tank
Suitable water: Tap water, demineralised water or distilled bottled water.
Always use clear, pure water.
To ensure the long-life of your appliance, we recommend that you use mix tap water and
non-perfumed demineralised water (50:50).
NEVER use pure demineralised water, water collected from a tumble drier or water softener or
rain water.
Note: Switch off your appliance before filling.
Release the safety button from the water tank No. 2
Fill the water tank using the filling beaker No. 6 (max. 750 ml) and funnel No. 5.
Replace the water tank safety button.
Note: The safety button will not open when there is pressure in the heater.
You must remove any steam or leave the appliance to cool before opening.
3. Getting started
Plug the appliance into an earthed socket
Press the ON button No. 7.
The pressure indicator light No. 5 is illuminated.
The appliance is ready to emit steam when this indicator light changes colour:
It changes from orange to green.
Remove the steam safety lock No. 8 and press the steam On/Off button No. 9 positioned on the
pistol handle to generate steam.
Note: After use, press the steam button for a few seconds to remove any residual condensation
water in the main hose.
Funnel
19
EN

Publicité

Table des Matières
loading

Table des Matières