Publicité
USER GUIDE-
1. If the disinfection cycle is interrupted due to the motion sensor being activated,
the unit will sound an alarm tone until an operator resets the unit
1. The unit may be reset by selecting the relevant timing cycle followed by the
start button
2. The unit will now go through the delay start process and then begin the cycle
3. You may also restart the unit using the remote control
2. If the disinfection cycle is interrupted due to a power outage, no alarm tone will
sound. Once power returns the disinfection cycle will need to be restarted as per
previous instructions
10
INTERRUPTION OF
CYCLE
!
Publicité
