IOGear GME435G Guide De Démarrage Rapide page 5

Gyroscopic Mouse Function
1. To turn ON the gyroscopic
mouse movement, press the
mouse control button
2. Once ON, simply point the
GreenPoint Pro at the screen
and move your cursor with a
flick of your wrist.
3. To calibrate the cursor location
with your point of aim, press
the mouse control button to
turn off mouse movement,
then aim the GreenPoint Pro
at the mouse cursor and press
the mouse control button
again to turn cursor
movement back on.
4. To turn OFF the gyroscopic
mouse movement or to avoid
cursor movement when using
the laser pointer feature,
simply press the mouse
control button
5. If the computer curser moves
while the mouse is stationary,
please recalibrate it as shown
below.
To recalibrate GreenPoint Pro, follow these steps:
1. Place GreenPoint Pro on a flat level surface.
2. Press the Left Mouse and Laser Pointer buttons at the same time.
Keep the GreenPoint Pro as steady as possible when following
this step.
3. Wait for 2 seconds. The LED indicator will flash one time indicating
calibration is complete.
.
.
4