Kicker RS65.2 Manuel D'utilisation page 3

CONFIGURATION
Before mounting and wiring the RS component system, determine which confi guration you will use for the
speakers and crossover.
RS Speaker
Confi gurations
Coaxial
Separates
RS Crossover
Confi gurations
Conventional 2-way
Bi-amplifi ed
Coaxial Confi guration
SPEAKER CONFIGURATION
The RS component system comes packaged in a separates confi guration.
To use a coaxial confi guration, see Fig. 1 and follow these steps:
1. Unscrew and remove the plastic phase plug from the center of the woofer.
2. Remove the rubber boot.
3. Screw the coaxial mounting post into the woofer in place of the phase plug.
4. Thread the tweeter's lead wires through the center of the woofer.
5. Snap the tweeter onto the coaxial mounting post.
6. Rotate the tweeter for the most appealing position.
7. Run the tweeter's lead wires through the groove in the woofer's backplate.
8. Reattach the boot.
2009 RS Multilingual f01.indd 3 2009 RS Multilingual f01.indd 3
ADVANTAGES
great for space-limited applications
or when separate tweeter mounting
is not possible
optimal sound quality and improved
sonic imaging (with proper tweeter
mounting)
ADVANTAGES
easy install | ideal when available
amplifi er channels are limited
optimal sound quality; more effi cient
usage of amplifer power
tweeter
CONSIDERATIONS
high frequencies may not be as
prominent | tweeter output may
need to be increased at crossover
trickier install | vehicle must have a
good tweeter mounting location
CONSIDERATIONS
audio fi delity not quite as high as
bi-amplifi ed confi guration
requires at least 4 amplifi er
channels | slightly trickier install
phase plug
Separates Confi guration
tweeter
3
11/21/2008 10:57:25 AM 11/21/2008 10:57:25 AM