Tools Required; Design Information; Product Dimensions And Clearances - IMC F90/010 Manuel D'installation

Tools Required

For leg adjustment - Legs are adjusted by hand – no tools required
To fix/anchor appliance to sides - Appropriate screws (NOT supplied); screwdriver
To fix/anchor appliance to floor - Appropriate floor fixing bolts or screws (NOT supplied); screwdriver
To fit door
Furniture door - Screws (screws NOT supplied); screwdriver
Stainless Steel Door - Adjustable spanner; cross head screwdriver
IMPORTANT
To ensure that no damage is caused to surrounding cabinetry ensure that you source appropriate sized
screws/fixing bolts that are no longer than the thickness of your door.

Design Information

Electrical Supply Requirements
The IMC appliance requires 220-240V, 50Hz IMC supplied from an appropriate Branch circuit protected
source

Product Dimensions and Clearances

To install the appliance, you will require the following under-counter space:
WIDTH
A minimum opening width of 300mm for a F90/010, F90/310, 400mm for a F90/030, F90/035
HEIGHT
A minimum opening height of 821mm
DEPTH
For all Models (without door) a minimum opening depth of 563mm. Ensure you have enough additional
depth to accommodate the thickness of the door being fitted
5