Technical Specifications - Metabo HS 8745 Notice Originale

12. Technical Specifications

Explanatory notes on the specifications on page 3.
Changes due to technological progress reserved.
dia. max.=Maximum cutting thickness
L = Useful blade length
n = Number of cuts at idling speed
0
P = Nominal power input
1
m = Weight without mains cable
Vibration total value (vector sum of three directions)
determined in accordance with EN 60745:
a = Vibration emission value (idle speed)
h
K = Uncertainty (vibration)
h
The vibration emission level given in this
information sheet has been measured in
accordance with a standardised test given in EN
60745 and may be used to compare one tool with
another. It may be used for a preliminary
assessment of exposure.
The declared vibration emission level represents
the main applications of the tool. However if the tool
is used for different applications, with different
accessories or poorly maintained, the vibration
emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration
should also take into account the times when the
tool is switched off or when it is running but not
actually doing the job. This may significantly reduce
the exposure level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration such as:
maintain the tool and the accessories, keep the
hands warm, organisation of work patterns.
Typical A-effective perceived sound levels:
LpA = Sound pressure level
L = Acoustic power level
WA
K , K = Uncertainty
pA WA
L = Guaranteed acoustic power level as per
WA(G)
2000/14/EC
Wear ear protectors!
Measured values determined in conformity with
EN 60745.
Machine in protection class II
~
Alternating current
The technical specifications quoted are subject to
tolerances (in compliance with the relevant valid
standards).
ENGLISH en
9