saro EB 26 Mode D'emploi page 24

SAFETY NOTICES
• No operation of the equipment by children or persons with impaired physical, sensory or mental
abilities; or lack of experience and/or knowledge. These persons are not able to recognize the
dangers of using electrical appliances and/or devices that generate heat and may cause accidents,
fire or damage to property.
• Disconnect the plug from the power outlet before cleaning, or disconnect the unit from the power
supply; this also applies if the unit is not used for a longer period of time.
• In the event of a fault or malfunction, turn off the unit and unplug the power cord. Notify your dealer.
He will carry out the repair with original spare parts.
• Refrigeration maintenance may only be carried out by qualified personnel.
• Never hang yourself from the door of the device and never climb onto it. The unit may tip over and be
damaged or cause injury.
• The amount of refrigerant contained in this unit is given in grams; it is also indicated on the type plate
of the unit.
• After a possible power failure or a short disconnection, switch off the device for a short time, wait 5
minutes, plug the plug in again and start the device.
• A damaged device must not be used!
Do not use any corrosive or abrasive cleaning agents! Do not use alcohol or alkaline
detergents, thinners or benzene� This could damage the plastic parts or painted
surfaces!
Never use hot water to clean the unit!
After delivery or transport of the device, do not connect it until the device has been idle
for at least 24 hours� This is absolutely necessary so that the coolant can collect in the
compressor�
After a power failure or if the device has been disconnected from the power supply, wait
at least 5 minutes before reconnecting and starting up the device!
If the unit is restarted immediately after it has been switched off, the fuse may trip and
interrupt the current flow. In addition, the compressor may be overloaded and damaged.
22
Stand 12/2012 WBS / 10/2018 TM