VONROC LB501AC Traduction De La Notice Originale page 8

EN
foreseen stop on the lower tube (7). Screw the
mounting screw until the wheel holder (13) is
tight securely.
• Screw the wheels (14) onto the wheel holder
(13).
Shoulder strap (Fig. A)
Attach the Carrying belt (15) to the Shoulder strap
hook (12) on the handle. To adjust the shoulder
strap to the required length, simply slide the adjus-
table strap buckle forward or backwards.
Attach the collection bag (Fig. A, C)
Always use the collection bag (8) when
using vacuum mode.
Attach the hook to the upperpart of the housing (9).
Slide the open end of the collection bag over the
tube (9) and connect it to the housing. Attach the
hook to the lower part of the housing.
Always check the vacuum bag for signs of
damage before each use. Small, sharp
objects can be sucked up and if the bag is
damaged or worn the objects might be
thrown in your direction or the direction of
others. This could lead to serious injury so
please check. If your bag is damaged or
badly worn please replace it with a new one.
4. OPERATION
Operation (Fig. A)
Plug in your appliance at the mains (or extension
lead) and when you are ready and well balanced,
press the ON/OFF button (5) and it will start. Press
again to turn it off.
Note: We recommend the use of a heavy-duty out-
door extension cable.
Alter the harness length so that you can stand up
straight and allow the blower to rest on its wheels
when in use. This will lighten the load across your
shoulders and back. Use in a forward and bac-
kward direction, not side to side.
Changing operation mode (Fig. A)
When you want to change from one mode to ano-
ther, simply pull the option lever (11) to suit your
requirement. Turn it clockwise to blower mode and
8
anti-clockwise to vacuum mode (remember to fit
the bag if you want vacuum mode).
5. MAINTENANCE
Before cleaning and maintenance, always
switch off the machine and remove the
mains plug from the mains.
Clean the machine casings regularly with a soft
cloth, preferably after each use. Make sure that the
ventilation openings are free of dust and dirt. Re-
move very persistent dirt using a soft cloth moiste-
ned with soapsuds. Do not use any solvents such
as gasoline, alcohol, ammonia, etc. Chemicals such
as these will damage the synthetic components.
ENVIRONMENT
Faulty and/or discarded electrical or
electronic apparatus have to be collected at
the appropriate recycling locations.
Only for EC countries
Do not dispose of power tools into domestic waste.
According to the European Guideline 2012/19/
EC for Waste Electrical and Electronic Equipment
and its implementation into national right, power
tools that are no longer usable must be collected
separately and disposed of in an environmentally
friendly way.
WARRANTY
VONROC products are developed to the highest
quality standards and are guaranteed free of
defects in both materials and workmanship for the
period lawfully stipulated starting from the date of
original purchase. Should the product develop any
failure during this period due to defective material
and/or workmanship then contact VONROC directly.
The following circumstances are excluded from this
guarantee:
• Repairs and or alterations have been made
or attempted to the machine by unauthorized
service centers;
• Normal wear and tear;
• The tool has been abused, misused or
improperly maintained;
• Non-original spare parts have been used.
WWW.VONROC.COM