Table des Matières
Publicité
eNet
eNet interface IP radio
Température ambiante
Degré de protection
Dimension L×l×H
USB
Port USB
Longueur de câble
LAN
Raccord
Fréquence radio
Puissance d'émission
Portée émetteur en champ libre
Catégorie de récepteur
6.2 Liste de paramètres
Les paramètres d'appareils peuvent être modifiés avec le serveur eNet :
Settings window
Device settings
Parameters
Manual commissioning
Repeater mode
IP address
Subnet mask
Standard Gateway
DHCP
Settings, channel/scene
Parameters
Local Operation
82589513
J0082589813
Setting options, Basic set
ting
On, Off
Basic setting: On
On, Off
Basic setting: Off
Freely-settable IP address
Basic setting: 192.168.0.23
Freely-settable subnet mask
Basic setting: 255.255.255.0
Freely-settable IP address
Basic setting: 192.168.0.1
On, Off
Basic setting: On
Setting options, Basic set
ting
On, Off
Basic setting: On
6/8
0 ... +45 °C
80×76×25,5 mm
Micro-prise
Douille RJ45 8 pôles
868,0 ... 868,6 MHz
max. 20 mW
Explanations
Blocks manual commissioning
for all device channels. In the
"Off" setting, the device can-
not be reset to the factory set-
ting.
In addition to its other func-
tions, the device can be used
as a repeater. In the "On" set-
ting, the device repeats all the
received telegrams.
Setting of the IP address of
the IP Gate.
Setting of the subnet mask.
Setting of the Standard Gate-
way.
Activate the DHCP client.
Automatic allocation of the
network configuration of the
eNet server via a DHCP (Dy-
namic Host Configuration Pro-
tocol). When DHCP is activa-
ted, on each switch-on, the
eNet server requests its IP ad-
dress from the DHCP server,
along with the subnet mask,
standard gateway and, if ne-
cessary, DNS address.
Explanations
With this device, the parame-
ter has no function.
IP 20
max. 3 m
typ. 100 m
2
16.06.2016
Publicité
Table des Matières
