Publicité
Les langues disponibles
Les langues disponibles
Installation Guide BRESSER MikroCam (1.3 / 3.0 / 5.0 / 10.0 MP)
Operation system:
Personal computer with Windows XP, Vista (32 Bit systems) Directshow 9.0 components.
Hardware requirement
CPU: 1. GHZ / RAM: 512 MB / HDD: 2GB / CD or DVD drive / USB: USB2.0 interface
Please confirm the computer equipped with USB2.0 interface and installed correct driver
before using the camera.
Do not use an USB hub
For your desktop PC use the backside USB ports
Connecting
Connect the USB cable to the PC.
Installation driver
1.Connect the camera to the USB2.0 interface,
system will prompt the following window. Select "No,
not this time", and then click "Next".
2.Select "Manual install software"，click "Next".
3. Select "From list or an assigned position", click
"next".
4. System informs that the program hasn't passed the Windows test, click "continue". (Whether it
passes the Windows test or not do not affect the useof the camera
5. After installation, click "Finish". Then the apparatuses can work properly.
Running MikroCamLab
Open the new"MikroCamLab1.6.4.0"file , double click
"MikroCamLab.exe", and according to the prompt to
finish MikroCamLab installation.
1. Double click "setup-xp.exe" then click next.
Publicité
