Basic Menu - schmalz X-Pump SXP Notice D'utilisation

B
ASIC MENU
The basic menu can be used to make all necessary settings for standard appli-
cations of the ejector and to display the current settings.
The function [tbl] is active only if one of the two time-controlled blow-off func-
tions has been selected. For further details, see the section "Bow-off functions".
Depending on the setting of the output function (hysteresis or comparator),
"H/h" or "C/c" is displayed when setting the threshold values.
Schmalz X-Pump
Set the value Set the value Value blinks as Value blinks as
confirmation confirmation
1st digit 1st digit > 3s > 3s
blinking blinking
blinking blinking
S
C H MA LZ
Brief operating instructions
go to go to
blinking blinking
go to go to
blinking blinking
go to go to
blinking blinking
go to go to or or
blinking blinking
go to go to
Unit = [10ms] Unit = [10ms]
blinking blinking
blinking blinking


4-21