Ritter stilo7 Mode D'emploi page 15

– Never leave the appli-
ance unattended while it is
operating.
– Never immerse the entire
hand blender, charging sta-
tion and plug-in power supply
in water or any other liquid.
Never expose the appliance to
rain or any other form of mois-
ture. If the appliance falls into
water, first unplug the charg-
ing station's plug-in power
supply from the mains socket
before removing any of the
appliance's components from
the water. Have the complete
appliance inspected at an
authorized service location
before using it again.
– Always ensure that your hands
are completely dry before
using the appliance. Do not
use the appliance if it is wet or
damp or while you are stand-
ing on a damp surface. Do not
use the appliance outdoors.
– The hand blender and charg-
ing station are not suitable for
washing in a dishwasher.
– Never touch any of the attach-
ments while operating the
hand blender and never insert
any objects into the appliance
while it is in use.
Risk of injury
– Always remove the plug-in
power supply from the socket
in the event of a charging sta-
tion malfunction. When doing
so, pull on the plug and not on
the cable.
– To avoid the risk of personal
injury, stop using the appliance
immediately if any parts are
damaged. Have the complete
appliance inspected at an
authorized service location
before using it again.
– If the plug-in power supply or
the power cord is damaged,
it must be replaced by an
original plug-in power supply
or power cord, which is avail-
able from the manufacturer or
the manufacturer's national
after-sales service.
English
11