Medisana AD 630 Mode D'emploi page 12

GB
■
Empty the water tank before a period in which the product is not
used.
■
Contact the manufacturer or a specialist if you have any doubts
regarding the way the product works, its safety or how to connect
the product.
■
If the supply cord is damaged, it must be replaced by the manu-
facturer, its service agent or similarly qualified persons in order to
avoid a hazard.
L Setting up
If liquids, damp air or fire come into contact with the product, there is
a risk of injuries.
■
Do not set up the product in rooms with high air humidity, such as
bathrooms or saunas.
■
Make sure that no liquids enter into the inside of the housing. This
will not only destroy the product but there is also a risk of fire.
■
Protect the product from the effects of the elements. Do not set it
up outdoors.
■
Only ever place the product on flat surfaces. If placed on an
inclined surface, water from the water tank may enter into the
housing.
■
Make sure that the air inlet openings on the base of the product are
not covered or sealed.
12
For your safety