Conventions Used In This Manual; Precautions For Placement And Use; Beware Of Condensation; Cleaning The Unit - Teac LS-M100 Mode D'emploi

Precautions for placement and
use
• The operating temperature range of this unit is
5–35 °C.
• Do not install this unit in the following types of
locations. Doing so could degrade the sound
quality and/or cause malfunctions.
Places with significant vibrations
Near windows or other places exposed to direct
sunlight
Near heaters or other extremely hot places
Extremely cold places
Places with bad ventilation or high humidity
• To enable good heat dissipation, do not place
anything on top of the unit.
• Do not place the unit on top of a power amplifier or
other device that generates heat.
• If this unit is placed near a power amplifier or other
device with a large transformer, it could cause a
hum. If this occurs, increase the distance between
this unit and the other device.
• This unit could cause color irregularities on a TV
screen or noise from a radio if used nearby. If this
occurs, use this unit farther away.
• This unit might produce noise if a mobile phone or
other wireless device is used nearby to make calls
or send or receive signals. If this occurs, increase
the distance between this unit and those devices
or turn them off.

Beware of condensation

If the unit is moved from a cold to a warm place, or used
after a sudden temperature change, there is a danger of
condensation; vapor in the air could condense on the
internal mechanism, making correct operation impossi-
ble. To prevent this, or if this occurs, let the unit sit for
one or two hours at the new room temperature before
using it.

Cleaning the unit

Use a dry soft cloth to wipe the unit clean. Do not wipe
with chemical cleaning cloths, thinner, alcohol or other
chemical agents. Doing so could damage the surface or
cause discoloration.

Using the TEAC Global Site

You can download updates for this unit from the TEAC
Global Site: http://teac-global.com/
1. Open the TEAC Global Site.
2. In the TEAC Downloads section, click the desired
language to open the Downloads website page for
that language.
NOTE
If the desired language does not appear, click Other
Languages.
3. Click the product name in the "Products" section.
4. Select and download the updates that are needed.
5