CHARgINg THE bATTERY
You can charge the battery using the USB cable that came with the camcorder. Follow the steps below to charge the
battery.
1.
Install the battery into the battery compartment.
2.
Open the SD card and connectors cover.
3.
Plug the mini-USB connector to the USB port.
4.
Plug the other end of the USB cable to a computer.
The LED lights red. After full charge, the LED turns to green.
Approximate charging time is 240 minutes with a USB connection. Actual charging time depends on current battery
capacity and charging conditions.
TURNINg ON/ Off THE CAmCORDER
≥
To turn on the camcorder, press the Power button. The LED indicator lights green.
≥
To turn off the camcorder, press and hold the Power button for 2 seconds.
36