1.
2.
3.
4.
8.
5.
9.
6.
10.
7.
1.
Product information
1. LED lamp
2. Display
3. Snooze button
4. Current time button
5. Wake up button
6. "-" button
7. Light button
8. FM radio button
9. Sunset button
10. "+" button
11. Wake up sound button
12. Volume button
13. Battery compartment
14. 12/24H format button
15. Light intensity button
16. USB Micro-B port
17. Antenna
Package contents
1. Wake-up light
2. USB wall adapter
3. Manual
4. USB-A to USB Micro-B cable
Usage instructions
LGT-001 has touch buttons on the front side, it is enough to
touch them rather than push them.
Push buttons are on the back side. This manual has numbers
in parenthesis to help you find the corresponding feature on the
illustration.
For example: "The volume button (12)" is referring to "12.
Volume button" on the illustration.
Choose a power source
You can power LGT-001 with either USB or batteries. Or both.
USB power source
When using USB as power source, connect a USB cable to
LGT-001 and to a USB wall adapter.
Connect the USB wall adapter to the mains power outlet.
You can also use the USB cable to connect LGT-001 directly
to a computer as a power source for LGT-001.
Included in the package: USB wall adapter and USB-A to USB
Micro-B cable.
Batteries
14.
11.
You can use batteries as a backup power source, if the power
12.
15.
is out, the batteries will help keep your settings.
Battery type: 2 x AAA (not included)
16.
13.
Installing the batteries
17.
1. To open the battery compartment (13): The arrow on the
battery cover indicates direction to push open the battery
cover.
2. Insert the batteries. Observe the polarity, which is marked
inside the battery compartment.
3. When the batteries have been inserted, put the battery cover
back.
Limited functionality
with only batteries
• The display (2) will automatically switch off after 5 seconds.
Press any button on the back side to switch it on again.
• Snooze is available. Press or touch any button other than the
snooze button (3) to stop the sound.
• All of the light functions are unavailable.
• Radio is available.
Changing current time
When LGT-001 is connected to power, the indication for hours
starts to blink, which enables changing of the current time.
You can also change current time by clicking on the current
time button (4).
1. Use the "+" (10) and "-"(6) buttons to adjust the hours. And
confirm with current time button (4).
2. Use the "+" (10) and "-"(6) buttons to adjust the minutes.
And confirm with current time button (4).
Change 12/24H format
The 12/24 hour format button (14) is on the backside of LGT-
001.
Press the 12/24H button (14) to switch between 12 and 24
hours.
When 12H format is enabled AM or PM is shown on the
display(2).
Wake up mode
On/off
Touch the wake up button (5) to switch the wake up mode
on/off.
When the wake up mode is turned on, current wake up time is
displayed for a few seconds, and then the display (2) returns
to show current time, and an wake up icon is displayed on the
display(2).
When wake up mode is turned off, the wake up icon is
removed from the display (2).
ENG
User Manual
3