USER'S MANUAL FOR THE DEVICE NOCOSPRAY (230V)
I – PRESENTATION OF THE DEVICE
GENERAL INFORMATION:
- Type: Diffuser
- Name: Nocospray
- Humidity of functioning and storage 25% to 75%
- Do not use in presence of a flammable anaesthetic mixture
II – PRECAUTIONS FOR USE
The manufacturer will not be held liable for any bodily harm or material damages caused by inappropriate or abnormal use of the
devise contrary to the precautions recommended in the list below (non exhaustive list):
- Use only with the products of the range Oxy'Pharm
- Make sure that electric power matches regular standards
- Do not introduce an object or liquid in the nose of NOCOSPRAY while it is working or not working
- Avoid moving NOCOSPRAY when it contains of the product, or at least, to maintain him (it) very horizontally
- Check the presence of the jet (9)
- Never fill up the bottles otherwise than with the product of the OXY'PHARM
- Remove the bottle of the NOCOSPRAY for transportation
The device diffuses a chemical substance; therefore it is necessary to pay attention:
- Not to inhale the product
- Not to smoke near the NOCOSPRAY while it is working
- Not to steer it towards an incandescent zone
- Not to be located in the room during the spray
11/09/2012
1 – Power Cable
2 – Used fuse
3 – Switch for power On/Off
4 – Handle
5 – Button of nose of the diffuser
6 – Nose of the diffuser
7 – Bottle (1 litre)
8 – Button to activate the spray, "Start" button
9 – Jet
10 – Filtering foam
11 – Selector for volume to be dealt with
12 – USB tracking (option)
13 – Switch for timer (option)
CHARACTERISTICS
Power
Tension
Frequency
Intensity
Maximum Intensity
Speed of rotation of the turbine
Net weight (without liquid or bottle)
PERFORMANCES
Exit speed of the air
Average output of the liquid
- Protection factor: IP10.
- Storage temperature 0°C to 50°C.
- Electric classification: Class 1
- Intermittent service.
®
range
1000 W
230 V mono+T
50 to 60 Hz
4,5 A
10 A
22000 rpm
5,8 kg
80 m/s
1000 ml/h
IMP-3003.100