Page 1
LFH-24 SeRIeS LFHS-24 SeRIeS ANSI/UL & CAN/ULC COMPLIANT LOW FReQUeNCY VISIBLe AND/OR AUDIBLe SIgNALINg APPLIANCe ADDItIONAL CAN/ULC LISteD PRODUCt INFORMAtION IS FOUND ON PAge 4 LFH-24 PRODUCT INFORMATION LFH-24 Horn Decibel Levels and Current Ratings Horn Decibel Levels: 24VDC Nominal Horn Horn Current Ratings (UL Max) Reverberant Room Current Ratings (mA) Over Input Voltage Range of 16-33V (mA) Regulated Regulated Regulated Regulated Minimum SPL Minimum SPL 24VDC 24VDC 24VFWR 24VFWR 24VDC Max. 24VDC Max. 24VFWR Max. 24VFWR Max. at 10Ft. Per at 10Ft. Per Operating Operating Operating Operating Horn Mode Operating Operating ...
Page 2
THIS APPLIANCE IS NOT RECOMMENDED FOR USE ON CODED OR PULSING SIGNALING CIRCUITS. HOWEVER, USE OF THE GTSM CONTROL MODULE IS PERMITTED TO SYNCHRONIZE THE HORN. w THE FOUR PULSE TEMPORAL PATTERN (TEMPORAL 4) CAN ONLY BE OBTAINED ON THIS PRODUCT WHEN USED IN CONJUNCTION WITH THE POTTER ELECTRIC GTSM SYNCHRONIZATION MODULE OR GTSM SYNCHRONIZATION PROTOCOL.
Page 3
5. Return to: Potter Electric Signaling Company, LLC 1609 Park 370 Hazelwood, MO 63042. Prior to returning, call the Potter Electric Customer Service Department at 1-800-325-3936 to obtain a RMA Number.
LIMITED WARRANTY For a period of 60 months from the date of manufacture (or as long as required by applicable law), Potter Electrical Signal Company, LLC warrants to you the original purchaser that your appliance will be free from defects in workmanship and materials under normal use and service.
SÉRIeS LFH-24 SÉRIeS LFHS-24 CONFORME À ANSI/UL ET À CAN/ULC APPAReIL De SIgNALISAtION VISUeLLe OU SONORe BASSe FRÉQUeNCe POUR DeS ReNSeIgNeMeNtS SUPPLÉMeNtAIReS SUR L’HOMOLOgAtION CAN/ULC DU PRODUIt, VOIR LA PAge 4. RENSEIGNEMENTS SUR LE PRODUIT: LFH-24 LFH-24 NIVeAUX SONOReS (dB) De L’AVeRtISSeUR et CARACtÉRIStIQUeS NOMINALeS De COURANt Niveaux sonores (dB) de Caractéristiques nominales de courant pour un Caractéristiques nominales de courant de l’avertisseur pour l’avertisseur : Pièce réverbérante avertisseur de 24 V c.c. (mA) une plage de tensions d’entrée de 16 à 33 V (mA) tension tension dBnps minimum dBnps minimum tension stabilisée tension stabilisée 24 V c.c. 24 V c.c. 24 V RDA 24 V RDA stabilisée stabilisée à 10 pi (3,04 m) à 10 pi (3,04 m) maximum de 24 V maximum de 24 V Mode de Courant de ...
Câblage pour la synchronisation du stroboscope et de l’avertisseur. Avec cette méthode, vous pouvez : Utiliser le protocole de synchronisation GTSM Potter Electric pour assurer la synchronisation des cadences temporelles à trois tonalités et à quatre tonalités et pour désactiver l’avertisseur, le cas échéant.
5. Retourner à : Potter Electric Signaling Company, 1609 Park 370 Hazelwood, MO 63042. Avant de retourner l’appareil, appeler Potter Electric au 1 800 325-3936 pour obtenir un numéro d’autorisation de retour (RMA) du Service à...
à remplace un avis juridique professionnel. Potter n’assumera aucune responsabilité quant aux mesures ou activités qui pourraient être, ou ne pas être, prises ou effectuées à la suite de ces renseignements.
Ce manuel est également adapté pour:
Lfhs-24 sérieLfhs-177wLfhs-110wLfhs-177rLfhs-15rLfhs-110r...
Afficher tout