Anker Soundsync A3341 Manuel De L'utilisateur page 4

Using Your Soundsync
EN
1.Turn on / off
RX mode
2
1
2S
ON Press and hold for 2 seconds
OFF Press and hold for 2 seconds
2. Button controls
Bluetooth transmitter / receiver mode
Flashing blue Power on
Connected to a device
Note: the status indicator flashes
Steady blue(RX mode)
differently according to the operation
status.
03
TX mode
2
1
2S
Connected to a device
Flashing blue (TX
Note: the status indicator flashes
mode)
differently according to the operation
status.
Steady green (for
Connected to two devices
5 seconds)
Flashing blue(4 times
Operation status: AptX HD
in every 10 seconds)
Flashing blue(3 times
Operation status: AptX low latency
in every 10 seconds)
Flashing blue(2 times
Operation status: AptX
in every 10 seconds)
Flashing blue(once in
Operation status: SBC
every 10 seconds)
Flashing blue(6 times
Operation status: AAC
in every 10 seconds)
Turn off your
Soundsync, and wait
for 3 seconds. Slide Clear present pairing list
switch to TX or RX then
restart your Soundsync.
EN
04