Publicité
Les langues disponibles
Les langues disponibles
echnical Manual (EN)
PXS24 Standard
This manual describes the functioning of the Standard-series PXS24 and the "stand-alone" operation. The PXS24 system
allows for many possible combinations, which are described in detail in the "PXS24 system" manual.
Up-to-date information and the most recent version of this document are available at:
Eaton.com/PXS24
We recommend downloading the latest versions of all relevant documents prior to planning.
A ARD
ARN-
The PXS24 series has been developed specifically for overload-protected and short-circuit proof 24 V
INGS
power supply units, of the type commonly used in automation applications.
Whenever the modules are switched on (i.e. when operating voltage is applied) they are live (provid-
ed that the slide switch at the front is set to "I")! If the unit has tripped (following an overload or
short circuit), switching it off and back on again will reset the trip.
Please refer to the technical data of the individual components, particularly the operating voltage and
the rated current.
E PXS24 S S-
There are many different options for combining the various components of the PXS24 series. To avoid
EM
restricting this flexibility, two separate series with different functionalities are available.
Eaton Industries (Austria) GmbH, Eugenia 1, A-3943 Schrems
www.eaton.eu/documentation
1.) Economy: PXS24E-...
2.) Standard: PXS24S-...
Feature
Rated current
overload protection
Modular design
3 load outputs
Push-in terminals
Busbar (+/-)
Local status LED
Local control (on/off/reset)
Subsequent control
Digital output (OK/tripped)
Digital input (on/off/reset)
Economy
Standard
0-10A
0-16A
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
4
MA-PXS24_Standard.docx/04.2018
150501507d/IL019188ZU
Publicité
