Renkforce 1362475 Notice D'emploi page 19

• Let the machine cool down to room temperature before moving/cleaning/servicing it.
• Do not open or move the machine when it is turned on or hot. Hot water, coffee or coffee
grounds may leak from the machine and cause burn injuries.
• Do not use the product if it is faulty or if the mains cable is damaged.
• Do not use any accessories that were not included with the product.
• Keep the product away from hot surfaces, such as cooking stoves or ovens.
• Never pull the mains plug from the socket by pulling at the cable. Always pull it from the mains
socket using the intended grips.
• Connect the product to a wall-mounted mains socket. Do not use power strips, extension
cables etc.
• The mains outlet must be located near to the device and be easily accessible.
• Unplug the mains plug from the mains socket if you do not use the device for an extended
period of time.
• Disconnect the mains plug from the mains socket in thunderstorms for reasons of safety.
• Make sure that the mains cable is not squeezed, bent, damaged by sharp edges or put under
mechanical stress. Avoid excessive thermal stress on the mains cable from extreme heat or
cold. Do not modify the mains cable. Otherwise the mains cable may be damaged. A damaged
mains cable can cause a deadly electric shock.
• Do not touch the mains cable if it is damaged. First, power down the respective mains socket
(e.g. via the respective circuit breaker) and then carefully pull the mains plug from the mains
socket. Never use the product if the mains cable is damaged.
• A damaged mains cable may only be replaced by the manufacturer, a workshop commissioned
by the manufacturer or a similarly qualified person, so as to prevent any danger.
• Never plug in or unplug the mains plug when your hands are wet.
• Consult an expert when in doubt about operation, safety or connection of the device.
• Maintenance, modifications and repairs are to be performed exclusively by an expert or at a
qualified shop.
• If you have questions which remain unanswered by these operating instructions, contact our
technical support service or other technical personnel.
19