Operating Instructions; Adjust The Staple Leg Length; Adjust The Penetration Depth - Kuda a.560M Mode D'emploi

Josef Kihlberg a.560M
KUDA PACKAGING
5
5.1 ADJUST THE STAPLE LEG LENGHT
The stapler is adjustable for 15 or 18 mm staples.
The stapler setting for a different staple leg lenght is
altered as follows. Start by adjusting the depth of sta-
pling for deep clinching (=) as shown in Fig. 4.
– With a 2,5 mm allen key, unscrew locking screw
(A) two turns.
– With a screw driver, adjust screw (B) to 15 or 18
mm leg length (Fig. 3)
– Tighten the locking screw.

5.2 ADJUST THE PENETRATION DEPTH

The depth of the stapling is easily adjused using the
setting knob.
– Depress the knob (Fig.4/1) and turn it to any of the
five positions.
– Low stapling penetration
= Deep stapling penetration
SERVIS A NAHRADNÍ DÍLY
6
www.kuda-packaging.com

OPERATING INSTRUCTIONS

Fig. 3
Fig. 4
+420 607 237 237
info@kuda-packaging.com
B
18mm 15mm
1
servis@josef-kihlberg.eu
06.14