Funkey DP-49 Mode D'emploi page 13

Attaching the piano:
Attach the piano body to the stand using 4 bolts (A)
and 4 washers (B) on each side.
A. With help from another person, lift the piano
onto the stand. Rest the piano on the stand and
line up the corresponding holes in the bottom
of the piano with the holes in the brackets on
the leg.
B. Make sure that the piano and legs are facing
the same way.
C. Tighten bolts into each hole until the piano sits
flush on the legs and is firmly attached.
Installing the music sheet holder:
A. Locate the tab holes for the music sheet holder
on the top of the piano just behind the control
panel. Slide the tabs on both ends of the
bottom of the music sheet holder into the holes
on the piano.
B. It is best if you put both tabs into the piano at
the same time.
C. Please cover all holes with the sixteen caps (C).
Assembly the bench:
The bench is assembled same way like stand and piano.
A. Insert 4 bolts (D) and 4 washers (E) into the holes in
the bottom of the seat, and four center holes in each
leg. Tighten with a screwdriver.
B. Repeat step A to attach seat.
C. Finish assembly by covering the bolts with 16 caps (F).
Check piano and seat for stability and proper assembly before using it.
Funkey DP-49 Kids