Avantgarde TBWC-46S Manuel D'utilisation page 19

SLIDING SHELF
To remove a sliding shelf:
1. Remove all bottles
2. Pull out the shelf
3. Take out shelf by lifting left side bracket and lowering right side one, then pull out
A
RECOMMENDATIONS FOR LAYOUT AND STORAGE OF YOUR WINE CABINET

Your cabinet was designed to store a maximum number of bottles in total security. We recommend
that you observe the tips to optimize loading.

Spread your bottles out as evenly as possible over the shelves, so that weight is not concentrated in
one point; also make sure your bottles do not touch the back of the cabinet, or the step at bottom.

Also make sure that bottles are not all grouped together at the top or bottom of the cabinet.

Observe the loading instructions provided in section 5, according to the type of storage fixtures with
which your cabinet is equipped, AND NEVER STACK BOTTLES ON A SLIDING SHELF.

Never try to pull out more than one sliding shelf at a time.
PLEASE NOTE
Before modifying your cabinet's original configuration in any way, be sure to ask your dealer for advice.
6/7/2013
B
19