Operating The Air Purifier - Lorell LLR00201 Manuel De L'utilisateur

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

BEFORE OPERATING THE AIR PURIFIER:
1. Carefully remove your air purifier from box and plastic bag.
2. Select a firm, level and flat location for the air purifier.
For proper air flow, locate the unit at least 1 foot from any wall or furniture.
Make sure none of the grills are blocked.
3. Before using, remove the filters then remove and discard bags.
4. Plug the power cord into a right voltage AC outlet.
IMPORTANT: When moving the air purifier, always lift unit by the carrying handle located on back.
"POWER/UV-C" BUTTON: Press this button to turn on or switch off the unit.
First press, power is on, UV is off.
Second press, power is on, UV is on.
Third press, power is on, UV is off.
Fourth press, power is off.
"SPEED" BUTTON:
The fan speed of the unit can be adjusted when the unit is in operation (L/I M/II H/III). Each time that you press on
the (SPEED) button, the speed is adjusted from L (low) to M (medium) to H (high).
"TIMER" BUTTON:
1) By pressing this button, the purifier can be timed to operate for intervals of 2 hours, 4 hours and 8 hours,
stopping automatically when the selected operating time has elapsed.
2) Press this button (Timer) to select the required operating time. A warning light automatically indicates the
remaining operating time.
3) To select the continuous operating mode, press the button repeatedly until there are no more indicator
lights lit up.
Important note: When the unit is not in use, switch it off and unplug it.
OPERATING INSTRUCTIONS

OPERATING THE AIR PURIFIER

4

Publicité

Table des Matières
loading

Table des Matières