DS Produkte KY8535MF Mode D'emploi page 18

EN
I
H
The securing hooks should be checked regularly to make sure they fi t securely. If
they become loose, the screws H and the nuts I must be retightened.
18
4. Attach the holders (12) for the smoking rack (9) and the fat
collecting tray (11) in the upper drum (13):
– place 1 holder on the inside on the pre-punched holes
and secure it with
– 2 screws D from the outside and 2 wing nuts G from the
inside.
Proceed in exactly the same way for the other holders.
5. Attach the handles (18) to the upper and lower drum (17):
– place 1 handle on the outside on the pre-punched holes
and secure it with
– 2 screws F from the outside and 2 washers B and 2 wing
nuts C from the inside.
Proceed in exactly the same way for the other handles.
6. Secure the legs (16) to the fi re bowl (15):
– place 1 leg on the outside on the pre-punched holes and
secure it with
– 2 screws D from the outside and 2 nuts E from the inside.
Proceed in exactly the same way for the other legs.
7. Fix the two shield parts (6+21) to one another and to the
grill tray (8):
– Place the right and left shield into the grill tray. When
you do this, make sure that the hooks sit correctly in the
recesses.
– Fix the two shields to one another by pushing 3 screws
D from the outside through the pre-punched holes and
securing them from the inside with 3 nuts E.
8. Attach the securing hooks (5) to the shield with holders (4):
– place 1 holder from the outside on the pre-punched
holes and secure it with
– 2 screws H from the outside and 2 nuts I from the inside.
– Hook the securing hooks into the holders. Bend them
apart slightly to do this if necessary.
Proceed in exactly the same way for the other securing
hooks.