Preparation Before Use - AmazonBasics 0749/1114 Manuel D'utilisation

Installation and operation
NOTE: This shredder includes safety interlocks. If the bin is
not fully pushed into the cabinet, the interlocks will not be
activated and the unit will not operate.
Install casters/wheels (see image).
Take care to install the two locking wheels in the front.
Insert plug into the AC power socket.
Push the switch to the "READY" (

Preparation before use

How to use the shredder correctly:
the entry slot of the shredder.
Try to avoid laminated materials, plastic bags etc. from
being passed through the shredder. These materials can
damage the cutters.
CDs/credit cards and smaller paper must be inserted to
the right.
Do not shred more than the stated sheet capacity in one
pass.
shredding when the switch is in the "READY"(
position.
Do not use the "REV"(
necessary. Overuse of the "REV"(
result in shredded paper becoming jammed in the entry
shredder.
) position.
locking wheels
)
)(reverse) function if it's not
) function can
Forward and reverse
In case of jammed paper, please follow the procedure below:
Check if the bin is too full with paper - the bin should be
emptied regularly to avoid paper becoming jammed in
the cutters.
Slide the switch to "REV" (
paper.
If the paper is so jammed that it will not come out in
reverse function, slowly push the switch between "REV"
( ) and "READY"(
can damage the shredder.
WARNING – Do not under any circumstances use any
metal objects (scissors, letter openers etc.) in an attempt
to clear the entry – this model has mains voltage inside
the casing, which could cause serious injury.
Troubleshooting
If the paper shredder will not start, please check the
following:
Is the machine plugged in correctly?
Is the switch set to the "READY"(
Is the machine jammed?
Is the bin full of shredded paper?
Has the motor overheated?
Is the shredder bin fully pushed in?
ENG
) to reverse the jammed
). Don't do this too quickly as this
) position?
5