Miracle-Gro AeroGarden Harvest Guide D'installation Rapide page 4

3 EASY STEPS TO GET YOUR AEROGARDEN
UP AND GROWING
CONGRATULATIONS!
Your garden is ready to grow. It really is that easy! For more details on planting, growing and harvesting
your AeroGarden, see page 5.
HOW TO RAISE AND LOWER THE LIGHT HOOD
4
1. Set Bowl into Base
Make sure that Bowl is securely seated in
Base and that Grow Deck is properly aligned on Bowl.
2. Plug Pump Power Cord into Base
Check to make sure that Pump power cord is
plugged into the connector at the back of the base.
Pump Power Cord (back view)
3. Select Your Power Supply Cord
• Select the correct power supply cord for your outlet.
•Insert the power supply cord into the AeroGarden power cord as
shown.
CAUTION: DO NOT Plug Power Supply Cord into outlet before attaching
to AeroGarden Power Cord.
To raise and lower the Light Hood, wrap one hand around the bottom of the
Light Post just above the Grow Deck and grasp the upper part of the Light
Post with your other hand. Push up to raise the Light Hood or push down
to lower. The Light Post will move up or down a notch with a little pressure.
When planting a new Seed Pod Kit, the Light Hood should be set to the
lowest possible position.