Technical Specifications - Weelko SPIN Mode D'emploi

WARNINGS
1. Pay attention when dragging the
trolley not to damage the wood.
2. Avoid exposing the product to the
sunlight.
3. Please note that the ultraviolet li-
ght of the UV drawer automatically stops
once you open it to protect the person
using it from the UV rays.
MAINTENANCE
1. Use a damp cloth with some drops
of soap to clean the surface. Dry it imme-
diately to prevent the wood from getting
wet.
2. Use a disinfection product to clean
the UV drawer after each use.
CHANGE OF FLUORESCENT
EN
1. Take out the drawer first. To remove
it, we must press the tabs that we find
in the guide, thes are the ones that hold
the drawer. There is a tab in each guide,
one should be pressed up and the other
down. As indicated in the photo.
2. When you take the drawer out, you can
see the fluorescent support. You do not
have to change the support, you just need
to change the lamp.
3. Make half a turn on the fluorescent
and it will come out easily.
4. Place the new lamp with a half turn.
5. The product is now ready to be used.
Part ref: 10071 (support and lamp)

TECHNICAL SPECIFICATIONS

RATED POWER
VOLTAGE
FFREQUENCY
NET/GROSS WEIGHT
DIMENSIONS (LXWXH)
MAX. LOAD
MATERIAL
6 w
AC220V
50 Hz
26/33 KG
55 x 40 x 53,5/70
50 kg
White Plywood
© 2020 Weelko
www.weelko.com
Importer: Weelko Barcelona, S.L.
ESB65397556