Sending A Message - Velleman MML30G Mode D'emploi

7.7. Sending a Message

Use the "Send Message" icon to transmit the message to the LED board.
• In the Message Window, type in a test message, e.g. "WELCOME".
• Click on the icon on the Toolbar to bring up the Message Window.
• Enter the sign ID number and select the page to send your message to. You have pages A to Z available. Each
page can be used to store a different message.
• Click on "OK" to send the message to the LED board. If the board did not receive your message, try sending the
message again.
7.8. BMP Graphic Editor
Use the BMP Graphic Editor to edit or create graphics of your own. To open this window, click on the "Bmp Graphics"
in the Menu Bar and then click on "Edit Graphics".
Graphic
Library
Select a Graphic Window by clicking on any one of the graphics from the "Select Graphic" list. A maximum of 16
graphic pages can be stored.
Color
Select any of the four colours to edit an existing graphic or
to create a graphic.
Graphic Data Function
Save
Delete
Insert
MML30G
Graphic Data Function Selection
save the current graphic displayed in the Graphic Window
delete a graphic from the Graphic Library
insert the current graphic from the Graphic Window into your message
Editor Area Edit Area Selection
Current selected colour
- 8 -
Editor
Toolbox
Display
Zoom In and
Zoom Out
Colour
Selection
Colours:
black, red,
green, yellow
VELLEMAN