Homak PROFESSIONAL Série Manuel Du Propriétaire Et Mode D'emploi page 5

and fasteners (located in separate Caster bag)
completely tighten the casters to the bottom
tray using a 14mm socket and 14mm combina-
tion wrench for the bolt head. (Note: Bolt head
and one washer should be on the inside of the
bottom shelf, nyloc nut and one washer will be
on the caster side.)
9.) Carefully turn cart onto its casters.
10.) Open top lid using the key provided.
11.) Mount push handle (Parts I) to the same
side of the cart with the locking casters using
the four long neck stove bolts, washers, and
locknuts (Part J) provided. Finger tighten at this
time.
12.) Insert remaining 4 short neck stove bolts,
washers, and locknuts (Part J) provided to the
opposite side of the cart. Note: This stove bolt
is shorter due to not having to pass through
a handle or bumper.
13.) Insert the remaining stove bolts, washers,
spring washers, and nuts (Part G).
14.) Using 13mm socket, completely tighten all
fasteners.
Step 8
Step 11
Step 13
- 3 -