König Electronic IR-EGGS4 Mode D'emploi page 3

Application 2:
Operation:
15°
15°
0.3m 5.7m
6m
Specifications:
• Operating Voltage:
• Power Consumption:
• Effective Operating Range:
• Infrared Tuning Frequency:
• Extender Probe:
Safety precautions:
Disconnect the product from mains and other equipment if a problem should occur. Do not expose the product
to water or moisture.
Maintenance:
Clean only with a dry cloth. Do not use cleaning solvents or abrasives.
Warranty:
No guarantee or liability can be accepted for any changes and modifications of the product or damage caused
due to incorrect use of this product.
1. Connect the IR extension cable and
IR receiving sensor to the infrared
receiver as shown in the picture.
2. Place the IR eyes precisely in front of
the IR sensors of the equipment.
3. Connect the power supply.
12 V DC, 250 mAh
1W (max)
6M (min)
30~60KHz
3 IR eyes on 2 meter cable
3
15° 15°