HQ Power VDSCD6001 Notice D'emploi page 7

c. After pressing the skip buttons, turn the jog wheel to quickly browse through the tracks. This is especially
helpful when using MP3 CDs with a large amount of tracks.
• Main Unit Rear Panel
1. AUDIO OUT
Right and left audio outputs to your mixing panel.
2. DIGITAL OUT
Digital output to a digital amplifier. When using a digital output the use of the pitch slider and the pitch bend
buttons is not recommended.
3. POWER SOURCE
Connect the power cord to the CD player.
4. REMOTE CONTROL CONNECTION
Connect the CD player to an optional remote control through this connection.
• Control Unit Rear Panel
5. CONTROL START UNIT 1/2
Connection to a fader start compatible mixing panel.
6. MAIN UNIT CONNECTION
Connect the main unit to the control unit using the included cables.
VDSCD6001_v3
7 HQPOWER