Geemarc iLoop+ Mode D'emploi page 8

MAKING / RECEIVING CALLS
3. MAKING / RECEIVING CALLS
- Place the loop around
your neck. Switch the
Power ON/OFF switch
ON position.
- Switch your hearing aid to
T mode.
- Press the HOOK ON/OFF
button. You are ready to
speak through your
iLoop +.
TM
- The Green LED will turn ON.
- During the call you can adjust the volume
of your device by using the volume control
knob located at the bottom of the iLoop
NOTE:
●The Breakout connector will release if the unit
gets entangled with the cables, so as to avoid
injury to the neck. If this happens, plug back
the connector in the jack to resume normal
operation.
on the side to
7
+.
TM