TP-Link TG-3468 Guide D'installation Rapide page 9

Controller, and click Update Driver Software...
4. Select Browse my computer for driver software.
5. Select Let me pick from a list of device drivers on my computer.
6. For Windows 7/Vista: Choose Show All Devices, and then click Next.
7. Click Have Disk...
8. Click Browse...
9. Go to Computer > CDXXX(H:) > TG-3468 > Drivers > Windows X (32bit or 64bit), choose the
.inf file, and then click Open.
10. Click OK.
11. Select Gigabit PCI Express Network Adapter (for Windows 7/Vista/8) or TP-Link Gigabit PCI
Express Adapter (for other systems), and click Next.
12. Wait a few seconds.
13. Click Close to finish the installation.
FAQ
Q1: How to find the driver if the CD is lost or broken?
A. You could find and download the driver at http://www.tp-link.com/download-center
Q2: What should I do if PC cannot find the new hardware?
A1. Check if the network adapter is inserted in the PCI Express slot properly.
A2. Reinsert the adapter or try to change another PCI Express slot.
A3. If the problem persists, contact our Technical Support.
English
7