5.
Secure L clip to the wall using # 8 1 1/2 in. screws at hole locations.
6.
Repeat for remaining L clip locations.
STEP 2 - Attaching Hardware To Side
Wall, Tower Side and/or Free Hanging
ATTACHING SHELF END TO SIDE WALL
1.
Place shelf onto L clip hardware.
2.
Place Shelf End hardware onto end of shelf.
3.
Place level onto shelf & level shelf front to back.
4.
Mark Shelf End hardware location.
5.
Remove Shelf.
6.
Place Shelf End hardware at marked location & mark screw hole locations.
7.
Install wall anchors if no stud is present.
2
8.
Secure Shelf to the wall using # 8 1 1/2 in. screws at hole locations.
9.
Repeat connection type process for opposite side.
ATTACHING SHELF END TO TOWER SIDE
1.
Place shelf onto L clip hardware.
2.
Place Shelf End hardware onto end of shelf.
3.
Place level onto shelf & level shelf front to back.
4.
Mark Shelf End hardware location.
5.
Remove Shelf.
6.
Place Shelf End hardware at marked location & mark screw hole locations.
7.
Secure Shelf to the tower using # 6 3/4 in. screws at hole locations.
8.
Repeat connection type process for opposite side.
CREATING FREE HANGING SHELF (no side attachment)
1.
Place shelf onto L clip hardware & place a level onto shelf.
2.
Place angle bracket under shelf flush with wall & underside of front rail.
3.
Level shelf front to back.