Cleaning And Maintenance; Technical Data - CARPOINT 0684871 Mode D'emploi

• Check if the air hose is correctly fitted.
• Set the air pressure to a value within the allowable operating pressure.
• Only keep your finger on the trigger at the moment of starting the tool.
SWITCHING ON AND OFF
• To switch on the tool, press the trigger switch (1).
• To switch off the tool, release the trigger switch.
IMPACT WRENCH
• Fit a required socket.
• Select the direction of rotation.
• Place the tool on the fastener.
• Switch on the tool.
• In necessary, adjust the impact force.
LUBRICATION (FIG. F)
Pneumatic tools should be lubricated frequently.
• Mount an in-line oiler between the tool and the air hose.
• If no in-line oiler is installed, insert a few drops of oil into the air hose connection before use.
LUBRICATING THE IMPACT MECHANISM (FIG. F)
The impact mechanism must be lubricated on a daily basis.
• Remove the screw (7) from the oil filling point (8).
• Insert a few drops of oil into the mechanism.
• Replace the screw and tighten it.

CLEANING AND MAINTENANCE

The machine does not require any special maintenance.
• Regularly check the tool for possible damages.

TECHNICAL DATA

max. operating pressure
6,3 bar
no-load speed
7000 per minute
weight 2,2 kg
Level of sound pressure measured according to EN792-4, EN792-6, EN792-9: 9,1 m/s2
ENVIRONMENT
Should your machine need replacement after extended use do not put it in the domestic waste but dispose of it in an environmentally safe way.
2
0684871i.indd 2 11-10-2007 08:06:13