Inserting/Replacing The Batteries - Kompernass SilverCrest SSSES 1.5 B2 Mode D'emploi

Inserting/replacing the batteries

CAUTION! MATERIAL DAMAGE
► Pay attention to the polarity indicated on the battery
compartment
► Always use batteries of type Micro AAA, LR03.
► Always use batteries of the same type.
1. Rotate the soap tank
the main appliance
2. Turn the main appliance
the battery compartment latch
compartment latch
until the battery compartment latch
(see Fig. 1).
Fig. 1
3. Remove the battery holder
ment
4. Remove the old batteries (if there are any) from the battery
holder
5. Insert new batteries as shown in the polarity diagram in
the battery holder
6. Slide the battery holder
ment
into the battery compartment
first (see Fig. 3 and 4).
■ 6 │ GB │ IE │ NI
r
when you are inserting the batteries!.
7
e
open
lock
r
.
t
.
t
r
. Make sure that the battery holder
8
anticlockwise to remove it from
.
7
upside down to access
e
. Rotate the battery
anticlockwise towards open
e
Fig. 2
t
from the battery compart-
.
t
back into the battery compart-
r
with the contacts entering
can be removed
open
lock
t
is inserted
SSSES 1.5 B2