Blaupunkt BLP7250-001 Mode D'emploi page 8

Input : DC 5V 2A
Output 1 : DC 5V 2A
Output 2 : DC 5V 2,1A
Output 3 : DC 5V 1A
Max consumption : 5W
Li-Po battery 8000mAh
Charging time : 6 hours
Dimensions : 140 x 70 x 16mm
Weight : 200g
Press the power switch to turn on/off the product, LCD displays "POWER BANK" and "25 50 75 100" as
battery level. The green wireless symbol on the left will flash 4 times.
Press the power switch twice to turn off, and the screen goes off.
DC charging:
Connect the product with wall charger by using micro USB cable, LCD displays the red wireless symbol
while charging, and "25 50 75 100" is flashing and displayed according to the current battery level, the
flashing will be steady when it is fully charged.
Charge with cable:
Connect the product with mobile phone with a cable, it will start changing automatically.
Wireless charge:
To use wireless charging, Press the power switch to turn on the product with green wireless charging
symbol on, and then put mobile phone on it for charging.
Note:
When you see the LED light is twinkling, it means the product is running low power.
This product will be power off automatically in 5 minutes when the mobile phone is fully charged.
Make sure you put the mobile phone onto the center place of the receiving terminal, which is allowed
20mm deflection only.
When current is overload, product will stop work automatically.
Specifications
Turn ON/OFF
Charge to the product
Discharge to the mobile phone