Operation And Control - Horizon Hobby Revolution REZO Manuel D'utilisation

Start Up
To start your quadcopter, follow this starting
sequence:
1. Power on the transmitter.
The transmitter beeps.
2. With the quadcopter on a level
surface, power on the quadcopter. The
quadcopter LEDs flash.
3. Fully raise the THROTTLE stick.
The transmitter emits one short beep.
4. Fully lower the THROTTLE stick. The
transmitter emits one long beep.
5. After the beep, binding is successful. The quadcopter LEDs
stay solid.
NOTICE: The quadcopter's flying range is 30m. If you fly
beyond this range, the transmitter signal will be lost.

Operation and Control

Some drifting during flight is normal. The quadcopter may become
unresponsive at the end of the battery life. To recharge the battery,
follow the Battery Charging instructions.
EN
Motor Start
To fly your quadcopter, press the THROTTLE
stick to the left-bottom and the CONTROL
stick to the right-bottom. The motor starts.
Or you can press the Right button once to
fly the quadcopter.
8