Technical Data; Purpose Of Use - Beta C37/8-O Mode D'emploi

INSTRUCTIONS FOR USE ISTRUZIONI PER L'USO
OPERATION MANUAL AND INSTRUCTIONS FOR MOBILE ROLLER CAB MANUFACTURED BY:
BETA UTENSILI S.P.A.
Via A. Volta 18
20845 Sovico (MB) ITALY
Original documentation drawn up in ITALIAN.
CAUTION
Store the safety instructions with care and hand them over to the users.

TECHNICAL DATA

• Weight: 73 kg
• Maximum capacity of mobile roller cab: 300 kg (mobile roller cab plus load)
• Maximum applicable static load, uniformly distributed on surface: 1000 kg
• Drawer capacity:
75 mm
150 mm
All stated capacities should be considered to be uniformly distributed on surfaces.

PURPOSE OF USE

The mobile roller cab should be used for the storage and transportation of tools and equipment in work
environments, according to such load capacities as listed in this manual.
WARNINGS OF USE
•
• Do not exceed the maximum capacity of each drawer and the roller cab as a whole.
• Do not open more than one drawer at a time, to avoid overturning.
• Do not use the roller cab for any applications other than those listed above.
Do not modify the roller cab or any of its parts.
• Store the roller cab in closed environments, sheltered from the bad weather.
• Remove the key during transportation..
MAINTENANCE
Maintenance and repair jobs must be carried out by trained personnel only. For such jobs, you can
contact Beta Utensili S.P.A.'s repair centre through your Beta dealer.
DISPOSAL
The roller cab, accessories and packaging should be sent to a waste disposal centre, in accordance
with the laws in force in your country.
4
IMPORTANT! READ THIS MANUAL THOROUGHLY BEFORE USING
THE MOBILE ROLLER CAB. FAILURE TO COMPLY WITH THE SAFETY
STANDARDS AND OPERATING INSTRUCTIONS MAY RESULT IN
SERIOUS INJURY.
30 kg
35 kg
EN I