Warranty Conditions - Boost EPA - 2500 Mode D'emploi

This part is the air entrance. It's used to refresh the power amplifier. Don't obstruct this part.
16 – Input sensitivity switch
This selector allows to choose the input sensitivity : either 0.775V, 1.0V or 1.44V
17 – Compress switch
This switch is used to choose compress or normal mode
SPECIFICATIONS
SPECIFICATIONS
Power max
Power 8 ohms
Power 4 ohms
Power bridge ( 4 ohms )
Distortion
Freq. response
S/N Ratio
Dimensions
Weight
Protection : Short-circuit, Overheat, DC current, Soft start, Temperature
Fuse : 2x 250V/20A 3AG
Norme CE

WARRANTY CONDITIONS

BOOST equipment is covered by a 1-year warranty on parts and labour except for Crossfaders (90 days).
The following rules apply from the day the equipment leaves the factory:
The date on the invoice is considered to be the date the warranty begins.
Only companies approved by BOOST are allowed to work on the equipment. Warranty becomes void when
other service technicians open the equipment.
During warranty period, defective equipment must be sent by pre-paid mail in the original box.
BOOST will return the goods by pre-paid mail during the first year of warranty; thereafter the mailing cost is
to be paid by the recipient
Potentiometers have a Alimited lifetime and are not covered by the manufacturer for more than normal use.
For all service enquiries, refer to your local distributor, as he is best able to help you.
EPA-2500
2x400W
2x200W
2x300W
600W
<0.03%
5Hz à 50KHz 5Hz à 50KHz
>100dB
483x465x89mm 483x465x89mm
13.5Kg
EPA-3500 EPA-4500
2x600W 2x800W
2x300X 2x400X
2x450W 2x600W
900W 1200W
<0.03% <0.03%
5Hz à 50KHz
>100dB >100dB
483x465x89mm
14.5Kg 17.5Kg
EPA-5500
2x1000W
2x500W
2x800W
1500
<0.03%
5Hz à 50KHz
>100dB
483x465x89mm
18.8Kg