Cleaning Instructions - Hkoenig WOD8 Manuel D'utilisation

USING YOUR RACLETTE
• Plug in the appliance.
• Put the switch at the position "MIN", the indicator comes on. Pre-heating time is 5 – 8 min
for the grill,
• Because the surface is very hot, it is recommended to put the appliance on anti-flame and
heat-proof cushion. It is also recommended that the minimal distance between wall or
environmentally components is not shorter than 15cm.
• It is possible that slight smoke smell comes out when first using.
• When first use, drop some oil on the surface of plate then wipe it with dry cloth.
• In order not to destroy the plating of Teflon, when turning or moving food, make sure a
wooden shovel is used.
• Don't put other mini pan which does not match the whole set on the appliance.

CLEANING INSTRUCTIONS

• Reasonable care will insure many years of service from
your unit. Avoid dropping items on the heating
elements.
• Always unplug unit from electrical outlet and allow to
cool before cleaning or maintenance operation and
accessories assembly.
• NEVER IMMERSE IN WATER or other liquid.
• Use damp soapy cloth or sponge to clean surface of
hotplate, chrome burner ring, drip pan and base.
• The sponge or cloth should only be damp without
water dripping to avoid water leaking into the hotplate.
• NEVER USE HARSH ABRASIVES OR STEEL WOOL
PADS ON ANY PART OF UNIT.
• Any servicing other than cleaning should be performed
by an authorized service centre.
Note: A short power supply cord is provided to reduce the risk of personal injury resulting from
becoming entangled in or tripping over a longer cord. If a longer cord is required, extension
cords are available from local hardware stores and may be used if care is exercised in their use.
If an extension cord is used,
(1) the marked electrical rating of the extension cord should be at least 16A, 250V, 3000W and
(2) the longer cord should be arranged so that it will not drape over the countertop or tabletop
where it can be pulled on by children or accidentally tripped over nor should it touch any part
of the hotplate body.